Five Star Ranges Range TN310-7BW Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Sporáky Five Star Ranges Range TN310-7BW. Five Star Ranges Range TN310-7BW User's Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 11
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
INSTALLATION INSTRUCTIONS
PROFESSIONAL RANGE MODELS
36” ALL GAS RANGE WITH OPEN BURNERS**
36” NATURAL GAS MODELS
*TN310-7BW
*TN310-7W
**THESE MODELS ARE FIELD CONVERITBLE FOR LP/PROPANE GAS.**
36” LP/PROPANE GAS MODELS
*PN310-7BW
*PN310-7W
**THESE MODELS ARE FIELD CONVERTIBLE FOR NATURAL GAS.**
IF YOU HAVE QUESTIONS, CALL 800-251-7224, 8 AM TO 5 PM EASTERN TIME, OR VISIT OUR
WEBSITE, WWW.FIVESTARRANGE.COM.
Zobrazit stránku 0
1 2 3 4 5 6 ... 10 11

Shrnutí obsahu

Strany 1 - INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS PROFESSIONAL RANGE MODELS 36” ALL GAS RANGE WITH OPEN BURNERS** 36” NATURAL GAS MODELS *TN310-7BW *TN310-7W **THESE MO

Strany 2 - Installation Instructions

STEP 11 ASSEMBLE SURFACE BURNER COMPONENTS • Remove shipping screw from each surface burner. • Remove each surface burner. • Place drip pan in posit

Strany 3

STEP 15 CHECKLIST FOR OPEN BURNER INSTALLATION  MAKE SURE ALL CONTROLS ARE IN THE “OFF” POSITION.  Gas supply is “on”  Electric power is “on

Strany 4 - REMOVE PACKAGING

Installation Instructions BEFORE YOU BEGIN CAUTION: Read these instructions completely and carefully. THESE RANGES S

Strany 5

INSTALLATION INSTRUCTIONS Please read these instructions before attempting to install this range Inspection & Unpacking Check the range carto

Strany 6 - ELECTRIC CONNECTION

STEP 1 REMOVE PACKAGING Before moving the range indoors:  Remove outer carton and packing material from the shipping base. The range is now r

Strany 8 - LEVEL THE RANGE

STEP 6 ELECTRIC CONNECTION This range must be supplied with 120 volt, 60 Hz. and connected to an individual, properly grounded branch circuit protec

Strany 9

STEP 7 CONNECTING THE RANGE TO GAS Because hard piping restricts When using test pressures greater movement of the range, the use of an

Strany 10 - STEP 14

STEP 8 LEVEL THE RANGE 1. Remove shipping tape from the leveling legs. 2. Carefully slide the range into position. Be careful not to damage

Komentáře k této Příručce

Žádné komentáře